Valdern 300W WATT HEATED ELECTRIC HEATING ELEMENT FOR BATHROOM TOWEL RAILS AND RADIATORS WARMERS/CHROME CAP

This electric heating element is designed for installation in selected domestic decorative and towel radiators. It is not necessarily suitable for use with other products. The element can be used as electric only or in a centrally heated system ( Dual Fuel ) to provide heating of the towel rail when the central heating system switched off (e.g during the summer). Protection device fitted inside the heater prevents over heating of the towel rail. The element should not be tested out of water. The element must only be fitted at the bottom of the radiator.

The element must be fitted to the radiator before mounting the radiator on the wall. These heaters are suitable for use as stand alone electrically heated or with all Open Vented Central Heating Systems. If they are used with sealed central heating systems or combination boiler systems, it is essential that you establish that there is adequate allowance for expansion. The work must be done to the standard in the Wiring Regulations and you should consider having work checked by a competent electrician to ensure it is safe.

Specification:

This product is available in 150W – 300W – 400W and 600W, Please select suitable one according to your towel rail dimensions.

Material : AISI 304 Stainless Steel

Length : 350mm ( 150W/300W/400W )

Length : 450mm ( 600W )

Diameter: 12.5mm

Thread: 1/2 BSP Standard

Cable Length:  1200 mm

Finish: Chrome Finish

IP Rating : IP64

Certification: TUV, CE

Warranty : 2 Year

Voltage: 220V-240V