ThermoSphere Self Adhesive Mesh 150W 1.0m2 UNDERFLOOR HEATING

ThermoSphere Self Adhesive Mesh 150W 1.0m2 Fully self-adhesive, the self-adhesive backing speeds up installation by holding the mesh to the substrate for easy self-levelling and tile fixing. Twisted Twin cable, technology Exclusive to Thermosphere, the TwistedTwin heating cable is the most robust and long-lasting cable in the market. The twisted construction minimises cable stress and comes with full earth protection to make it one of the safest heating cables available. The unique, twin twisted stress-free cable construction creates a longer lasting cable with zero electromagnetic field. Low profile Lay Flat technology makes installation easy. The cold tail is only 4mm thick so it can be concealed within the tile adhesive layer. Cable protection, it’s installed wire-side-down which means the heating cable is protected by the mesh from damage during installation. Use for walls, not just floors, Thermosphere Mesh is so versatile, you can even add that little bit of extra comfort by installing it under wall tiles in wet rooms and shower cubicles. Floor finishes, Thermosphere Mesh is recommended for tile and stone floors, but with the right accessories it can be used in almost any type of floor specification including carpet and vinyl, as well as wet rooms. A choice of output, The higher the wattage, the faster the heat-up time. For example, 200W/m2 is perfect for high demand rooms like conservatories. 150W/m2 is a great primary heat source for well insulated rooms and 100W/m2 is usually for floor warming only. Voltage 230V 50Hz Output 100W/m2, 150W/m2, 200W/m2 Total thickness 3.5mm Area length 1.5 – 12.0m2 Mesh material Self-adhesive fibreglass Cable insulation FEP and HR-PVC Protection rating IP68 Recommended max temp 27oC (limited by controls) Warranty Lifetime