Teflon Tape, Thread Sealing Tapes, PTFE Plumber Tape Leakage Water Pipe Thread Sealing Tape 12mm0.075mm10m(10 Rolls/White),

Size: 10 rolls of PTFE plumbing tape, each tape is 1/2 x 394 inch (12mm*0.075mm*10m) 328 feet in total, enough for you to use for a long time. Material: Teflon tape is made of PTFE, non-toxic and non-flammable. Good waterproof, anti-aging and corrosion resistance characteristics. EASY TO USE: Pipe sealing tape is non-stick on fingers and easy to remove; simply wrap the tape around the threaded male end of the pipe or connector and screw it on. Good quality: good insulation performance, chemical stability, resistance to atmospheric acids and humidity. Temperature resistance: -250°C to 350°C. Tensile Strength: ≥10 (MPa) Widely Applied: The thread seal tape is suitable for most types of fresh water and gas pipes, shower heads, sprinklers, pipe fittings, gas heaters, etc. Features Thickness of 1/2 inch thread seal tapes: approx. 0.075mm Total length of 1/2 inch thread seal tapes: about 12m/394inch/roll Material: Poly Tetra Fluorine Ethylene White color High quality, durable and corrosion resistance. Temperature resistance: -250°C to 350°C. Tensile strength: ≥10 (MPa) Mainly used as pipe thread sealant, shower heads, sprinklers, pipe fittings and more household appliances. How to use: 1. Clean the two threaded interfaces that need to be sealed and keep them clean. 2. Wrap the end of the teflon tape around the interface of the internal thread, the winding direction should be consistent with the direction of rotation of the two interfaces. 3. Use Teflon tape to completely cover the internal thread interface. 4. Screw the outer thread interface to the tape-wrapped inner thread interface and tighten it. 5. Open the valve and check whether the sealing is good, if not, you can increase the thickness of the winding tape. Package included: 10 x rolls of 1/2 inch thread seal tapes