Motorized Or Manual Valve Motorized Electric 2-way Ball Valve 220V DN15 DN20 DN25 DN32 DN40 DN50 (DN20)

This motorized valve can be adjusted to the valve by the motor or by the manual

220V

The installation method: On the valve there are 3 wires, First connect the yellow wire to N 220v. Second, you need to find a switch to swap the blue and brown cable connection. When the blue wire is connected to the 220v L,
the valve opens. After complete opening, the actuator switches off; When the brown wire is connected to 220v L, the valve closes, after complete closing, the actuator switches off.

Note: blue and brown wire cannot be connected to 220v L at the same time. or the valve will be damaged