Gledhill BoilerMate Stainless Steel Thermal Store 120 Litre

The Gledhill Boilermate range is a thermal store that functions alongside central plant boilers to provide hot water. This product is known for its high efficiency levels and good performance, with great usability. Gledhill Thermal Store is clearly one of the best solutions available today. BoilerMate CP is fed directly by a central plant boiler, which heats the store via an internal coil. Cold mains water then passes through a plate heat exchanger and is instantaneously heated to provide mains pressure hot water. As the BoilerMate Thermal store is open vented, there is no requirement for an external expansion vessel or discharge pipework. The controls are plumbed neatly inside the appliance, promising a clean finish within your airing cupboard, and you can site the header tank on top of the unit or remotely, for maximum flexibility. Suitable for use with central plant heating systems, with benefits including reduced pipe size and a reduction in central plant size.

Features:

• Mains pressure hot water giving power shower performance
• Cylinder reheat time of approximately 20-25 minutes
• Increased system efficiency, reducing running costs
• No annual maintenance or safety check requirement
• No G3 qualification requirement for installation
• Hot water is generated by passing mains old water through a plate heat exchanger, eliminating any risk of Legionella
• Easy to install, and can be fitted to existing systems, with no requirement for pipework oversizing

Details:

• Height: 1075mm
• Width: 530mm
• Depth: 595mm
• ErP rating: C
• Heat loss: 65 Watts
• Capacity: 116 Litres
• Domestic hot water volume: 105 Litres
• Rating of coil: 12 kW
• Coil surface area: 1.18 m2
• Pressure loss of coil: 0.20 bar
• Guarantee: 5 Years

MODEL SELECTION:

Bedrooms: 1-2

Bathrooms: 1

En-suite shower rooms: 1